Conference papers

/ Publications /

(438)

Recycling of textile automotive components by hydro-separation.

Proceedings 6th World Congress on Integrated Ressource Management, Geneva, Switzerland, 2002, Conference CD.

(437)

What is the innovation by hydrojetting?

The Surface Protection Conference and Exhibition 2001, Oslo, Norway, 2001.

(436)

Surface issues of fluid jet profiled low-carbon steel.

International Congress on Advanced Materials, their Processing and Applications, Munich, 2001, Conference CD.

(435)

Fluid jet erosion as a non-linear fracture process - a review.

Proceedings 13th International Conference on Wear of Materials, April 2001, Vancouver, Canada, Abstract printed.

(434)

A control parameter for the optimization of ultra-high pressure fluid systems (UPFS).

Proceedings 1st International Conference on Mechanical Engineering, November 2000, Shanghai, PR China, 79-84.

(433)

Steel surface profiling with high-speed waterjets.

Proceedings 1st International Conference on Mechanical Engineering, November 2000, Shanghai, PR China, 69-73.

(432)

Introduction of a new precision cryogenic icejet system for processing materials.

Proceedings 6th Pacific Rim International Conference on Water Jetting Technology, October 2000, Sydney, Australia, 136-139.

(431)

Short-time cavitation erosion of concrete.

Short-time cavitation erosion of concrete. Proceedings of the 2000' China Jet Technology Conference, Hefei, PR China, Sept. 2000, 53-58.

(430)

Waterjet-based decontamination of structures and chemical equipment.

International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, Frankfurt am Main, Germany, 2000.

(429)

Steel surface preparation by hydroblasting - state-of-the-art

Proc. 5th International Colloquium on Materials Science and Restoration, November/December 1999, Esslingen, Germany, 247-260.

(428)

Selective carpet separation with high-speed waterjets

Proc. International Symposium on New Applications of Waterjet Technology, 1999, Ishimomaki, Japan, 227-231.

(427)

Surface preparation of concrete - the German experience

Proc. International Symposium on New Applications of Waterjet Technology, 1999, Ishimomaki, Japan, 207-218.

(426)

Carpet recycling with high-pressure water jets

Recovery, Recycling, Re-Integration, Geneva, Switzerland, 1999, III.132-III.136

(425)

Steel cutting and surface preparation by ultra-high pressure water jetting technology

International Conference on Welding in Maritime Engineering, Haludovo, Croatia, 1998, 303-317

(424)

Carpet recycling with high-pressure water jets

14th International Conference on Jetting Technology, Brugge, Belgium, September 1998, 357-363

(423)

Pre-evaluation of hydro-demolished concrete surfaces by drilled core testing

8th International Symposium on Concrete Roads, Lisabon, Portugal, 1998, IV.7-IV.12.

(422)

Osetreni betonu pomoci vysokotlake vodni trysky - dnestni zkusenosti.

VII. Mezinarodni Symposium Sanace Betonovych Konstrukci. Brno, Czechia, 1997, 155-163.

(421)

Recent developments in ultra-high pressure water jet technology.

International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, Frankfurt am Main, Germany, 1997.

(420)

Recent developments in ultra-high pressure hydroblasting for industrial structures.

International Conference on Protecting Industrial and Marine Structures with Coatings, The Hague, Netherlands, 1997, Paper 6, 1-13.

(419)

Concrete behaviour during compression testing and water jet erosion - some correlations.

4th International Colloquium Materials Science and Restoration, Eßlingen, Germany, 1996, 1813-1826.

(418)

An air-water jet for concrete removal - laboratory investigation.

13th International Conference on Jetting Technology, Sardinia, Italy, 1996, 369-378.

(417)

Development of ultra-high pressure water jet systems and their application for maintenance and repair.

13th International Conference on Jetting Technology, Sardinia, Italy, 1996, 359-367.

(416)

Concrete cylinder standard compressive testing as a comminution problem.

Geomechanics '96 (ed. Z. Rakowski), Roznov p.R., Czechia, 1996.

(415)

Environmentally safe surface preparation with high-pressure water jet technique.

Geomechanics '96 (ed. Z. Rakowski), Roznov p.R., Czechia, 1996.

(414)

Accelerated high speed water erosion test for concrete wear debris analysis.

STLE/ASME Tribology Conference, San Francisco, USA, 1996, Reprint 96-TC-7B-1, 1-7.

(413)

The influence of abrasive grain size distribution parameters on the abrasive water jet machining process.

25th North American Manufacturing Research Conference, Ann Arbor, USA, 1996, SME-TP MR 96-115, 1-6.

(412)

A fracture model for hydrodemolition.

Proc. 8th American Water Jet Conference (ed. T.J. Labus), Houston, USA, 1995, 61-77.

(411)

A simplified mathematical energy dissipation model for water jet and abrasive water jet cutting processes.

Proc.8th American Water Jet Conference, (ed. T.J. Labus), Houston, USA, 1995, 829-843.

(410)

Cutting refractory ceramics with abrasive water jets.

Proc. 8th American Water Jet Conference (ed. T.J. Labus), Houston, USA, 1995, 229-244.

(409)

Relation between water jet erosion and compression testing of concrete.

Proc. 8th American Water Jet Conference (ed. T.J. Labus), Houston, USA, 1995, 809-828.

(408)

Experimental estimation of energy dissipative processes in abrasive water jet cutting.

Proc. 8th American Water Jet Conference (ed. T.J. Labus), Houston, USA, 1995, 187-206.

(407)

A generalization of abrasive water jet erosion modeling.

Proc. 8th American Water Jet Conference (ed. T.J. Labus), Houston, USA, 1995, 359-371.

(406)

Acoustic emission measurements on brittle materials during abrasive waterjet cutting.

Proc. 1st International Machining and Grinding Conference (ed. S. Malkin and W.J. Zdeblick), Dearburn, USA, SME MR95-184, 1995, 439-458.

(405)

Abrasive water jet blasting.

Proc. 4. International Symposium Industrial Floors (ed. P. Seidel), Techn. Akademie Esslingen, Germany, 1995, 317-330.

(404)

Resistance parameters of rocklike materials against abrasive water jet cutting.

Proc. 35th US Symposium on Rock Mechanics, (ed. J.J. Daemen), Lake Tahoe, USA, 1995, 355-359.

(403)

The influence of material instabilities in a brittle multiphase material on its behaviour in high speed water jet machining.

Proc. International ASME Symposium on Material Instabilities (ed. R.C. Batra), Chicago, USA, 1994, 327-344.

(402)

Calculation of exit jet energy in abrasive water jet cutting.

Proc. International Mechanical Engineering Conference (ed. W. Alzheimer), Chicago, USA, 1994, 361-366.

(401)

The fracture of concrete due to erosive wear by high velocity water flow.

Proc. ASME Conference on Wear and Lubrification (ed. W. Marschner), STLE, Lahaina, Hawaii, USA, 1994, 1-7.